Sterilization Equipment

Cylinderical Horizontal -High Pressure

Introduction :- The DYNAMIC STERILIZER is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through. All models work on principle of downward displacement of air which is most economical method of obtaining sterilization.

Construction:-

Triple Walled with Steam jacket. Inner chamber and steam jacket made of S.S With leak proof argon welding. Lid Made of S.S 12 mm. Autoclave mounted on tubular steel frame with ground leveling screwed flages.

Pressure Control:- The pressure control device is incorporated in all electrically operated sterilizer. It economies on power consumption and reduces the frequent opening steam release value and prevents the release of steam in room.
Operating Temp. & Pressure

Sterilizing Temp.	:	120* C
Sterilizing pressure	:	1.2 o 1.5 Kg/cm2 (15 psi- 20 psi)
Power	:	Suitable to operate on 440V, 3ph, 50 Hz, Ac Supply

Available in following capacities :-

Dia	x	Depth	Load
400	x	600mm	6 KW
400	x	1100mm	9 KW
500	x	900mm	9 KW
500	x	1200mm	9 KW

Request a Quote

Rectanglor Cylinderical Horizontal -High Pressure

Construction :The unit has inner Chamber, Boiler, Lid and Jacket - all made of 304 grade stainless Steel, outer chamber of thick gauge mild steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. It is supplied complete with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand. It is available in the following standard sizes. Operatable on 3 Phase, 440 Volts A.C. Supply. Mode of Heating :Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 440 volts three phase 50 cycles.

Dia	x	Depth	x	Load
600 mm	x	600 mm		1200 mm
600 mm	x	900 mm		1500 mm

Note : Special sizes can be fabricated as per the customer's requirement.

Next >>